Recommended Use:
Luxury polyurethane coating for wood furniture, articles, and components, offering a range of opaque, metallic, and clear finishes suitable for high-end woodwork applications.
Application Guidelines:
- Prepare wood substrate by sanding with emery paper (180) along the wood grains, followed by finer emery (220/320). Wipe off all dust particles.
- Apply Imperia Epoxy Block Primer for initial coating, with two light sandings in between applications using sandpaper no. 400.
- Proceed with selected base and hardener (KHX001 + KHXKB3 for clear coat, KHY001 + KHYKB3 for white base), using spray method and applying additional coats based on finish requirements.
- Follow with top coats as needed (clear or metallic finishes), allowing 3-4 hours for recoating.
In Can Properties:
- Viscosity: 60±5 sec for clear sealer, up to 120±5 sec for gloss and metallic bases.
- Specific Gravity: 0.98 ± 0.01 for clear, up to 1.66 ± 0.05 for white sealer.
- Gloss: Clear Matt (10 ± 2 at 60°); Gloss (90 ± 5 at 20° for gloss options).
Application Properties:
- Hardener (L): Imperia Epoxy Block Primer Hardener (1:1 mixing ratio).
- Recommended Thinner: T12 (Clear & White Coats), T80 (Matt & Gloss Finishes).
- Pot Life: Use within 10-12 hours to maintain efficacy.
- Drying Time: Surface dry in <30 minutes; hard dry overnight.
Film Properties:
- Finish Options: Clear Matt, Gloss, White Gloss, Metallic.
- Coverage: 10-11 sq. m/L/coat (30 microns DFT) for all finishes.
Storage and Handling:
Store in a cool, dry area away from heat sources and ignition points. Keep tightly sealed and dispose of responsibly. Avoid pouring leftover product down drains.
Safety Information:
Consult MSDS for handling. Ensure adequate ventilation during application and drying. Avoid skin and eye contact; in case of contact, rinse thoroughly with water.
Reviews
There are no reviews yet.