Berger Imperia Epoxy Block Primer is a premium-quality, two-component epoxy-based primer specifically designed for masonry and concrete surfaces. This high-performance primer is engineered to seal porous surfaces, offering excellent adhesion and moisture resistance, which prolongs the life of topcoat applications. With its quick-drying formula and easy-to-apply consistency, Imperia Epoxy Block Primer provides a strong, durable foundation for a variety of coatings, ensuring a uniform and long-lasting finish. Formulated without lead or heavy metals, this primer is both safe and effective, enhancing the longevity and aesthetic appeal of indoor and outdoor surfaces.
Recommended Use:
Berger Imperia Epoxy Block Primer is ideal for use on masonry, concrete walls, and ceilings where a moisture-resistant, high-bond base is required. Suitable for interior and exterior applications, it is especially effective in high-humidity environments such as basements, kitchens, and bathrooms. Apply multiple coats for enhanced durability and a smooth, even finish.
Application Guidelines:
- Surface Preparation:
Ensure the surface is clean, dry, and free of grease, dust, or loose particles. Sand any uneven areas to create a smooth, uniform base. For optimal results, apply a degreaser to remove any stubborn stains or residues. - Application Procedure:
Mix the two components thoroughly before application. Apply a single, even coat using a roller, brush, or sprayer, allowing each coat to dry for 1-2 hours before applying additional layers. Use a finer grit sandpaper between coats for a smooth finish.
Technical Properties:
| Parameter | Specification |
|---|---|
| Viscosity @ 30°C, B4 Cup | 20 ± 5 seconds |
| Specific Gravity, gm/Lt | 1.10 ± 0.05 |
| Surface Drying Time | Less than 30 minutes |
| Shelf Life | 12 months (sealed state) |
Pack Sizes:
Available in 1 L, 4 L, and 20 L.
Storage and Handling:
Store in a cool, dry place away from direct sunlight and sources of ignition. Keep containers tightly closed and out of children’s reach. Dispose of leftover product responsibly according to local regulations.
Safety Information:
Ensure adequate ventilation during use. Wear appropriate protective gear, including gloves, eye protection, and a dust mask if sanding. Avoid inhalation of vapors and contact with skin or eyes. In case of contact, rinse thoroughly with water.
Reviews
There are no reviews yet.